Current time: 02-23-2018, 08:14 AM Hello There, Guest! (LoginRegister)


 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
I have a 2000 Interceptor and a 2000 Ford expedition.
01-28-2018, 11:07 AM (This post was last modified: 01-28-2018 11:08 AM by Dan3-2167.)
Post: #1
I have a 2000 Interceptor and a 2000 Ford expedition.
I am junking the 2000 Expedition. What should i take off the Expy for use in the interceptor?
Find all posts by this user View This User Garage
Like Post Quote this message in a reply
01-28-2018, 11:21 AM
Post: #2
RE: I have a 2000 Interceptor and a 2000 Ford expedition.
5.4 or 4.6?
Either way, I believe it should have PI heads, that would be something to get off of it.
It might have higher gears in the rear but might have a 31 spline carrier(gears would swap but carrier wouldn't...but it's sellable).
If it has a center console, that might work.
[Image: 7082f310-ddf0-45a9-9fc0-153a7ca0a8ce.jpg]
1989 Country Squire - needs more air
2005 CV Sport
SW full exhaust, Heinous control arms, Hawk pads, Powerslot rotors, Addco swaybars, BBK TB, Accufab plenum

Panther, Ford, Crown Victoria, Mercury, Grand Marquis, Marauder, Lincoln, Town Car, Police Interceptor, P71, CVPI, LX Sport, LX, LS, GS, Signature, Limited
Find all posts by this user View This User Garage
Like Post Quote this message in a reply
01-28-2018, 11:26 AM
Post: #3
RE: I have a 2000 Interceptor and a 2000 Ford expedition.
4.6 in both
Find all posts by this user View This User Garage
Like Post Quote this message in a reply
01-28-2018, 11:28 AM
Post: #4
RE: I have a 2000 Interceptor and a 2000 Ford expedition.
Was thinking about center console.....anyome ever put a center console in their 2000?
Find all posts by this user View This User Garage
Like Post Quote this message in a reply
01-28-2018, 11:34 AM
Post: #5
RE: I have a 2000 Interceptor and a 2000 Ford expedition.
One of the members in this forum took the center console out of an Explorer and did some fabrication to make it fit perfectly with the cup holders in his Crown Vic. He also bolted it down, so it’s secured to the interior and won’t move around.
[Image: fe571afe-5636-45d2-8f76-c7eb8d09192c_zpseqfjcbef.jpg]
2006 Light Ice Blue P71 - Jmod, Metco Control Arms, Marauder Rear Sway Bar, Whelen PAR 46 LED Floodlight, Wig Wags, Strobe Lights, 161K, Otherwise Stock
Find all posts by this user View This User Garage
Like Post Quote this message in a reply
02-03-2018, 11:00 PM
Post: #6
RE: I have a 2000 Interceptor and a 2000 Ford expedition.
save mirror if has compass or dim, electric motors in seats may be compatable, power steering pump? water pump, heads, radiator mike make it fit in something, seatbelts for strap mateirial, lots of free bolts! horns, bulbs, fuses relays, lots of wire, mirrors to use as tool mirrors, muffler, jack, tire iron, sheet metal panels cut from doors or hood, shocks, gas cap, coolant cap, power steering cap, radiator hoses, radio, speakers, intierior handles on roof, cool ford emblems, i would gut it for everything i could get ha ha. electrical connectors, check and see if brake booster or master cylinder is same. dlc connector,
Kenny 491304- 1999 crown vic (back burner project) with 260,100 miles planning on it to be my drive to work/beater/race car mode/parts kick around car, Also have a nice 2002 crown vic 182,000 miles with 200 lb weight delete, & love it!
Find all posts by this user View This User Garage
Like Post Quote this message in a reply
[+] 1 user Likes ksurf_k's post



Forum Jump:


User(s) browsing this thread: 1 Guest(s)

PantherBB.com
Copyright 2012-2015 - All Rights Reserved.

Images, graphics and data contained in this forum are the properties of the contributing members, or PantherBB.com
and may not be used without expressed written consent.
PantherBB.com
is not affiliated with the Ford motor company.